Payment & Shipping Terms:
|Product Name:||Flat Solid Polycarbonate Sheet||Color:||Transparent Or Customized|
|Thickness:||1.5mm To 15 Mm||Length:||4X8ft Or Customized|
|Warranty:||10 Years||Application:||Wall And Roof|
1.5mm to 15mm Flat Solid Polycarbonate Sheet for Greenhouse / Skylight
Feature of polycarbonate sheet
|Light weight||it is 1/2 weight of glass|
|Impact Resistance||30times of acrylic and 250-300times of glass in the same thicknessNo crack appears after 3kg hammer falls down the sheet within 2m height.Therefore , it is called “infrangible glass” and “sound steel”.|
|Bendability||It can be cold bending .The min bending radius is 175 times of thickness. It can be formed into arch and semicircular etc.|
|Sound insulation||it is 3-4Db higher than glass at the same thickness . It is the international preferred noise barrier material on highway.|
The heat transfer coefficient is lower than glass and
other plastic ,the heat insulation is 7% to 25% above the glass in the same thickness and can reach up to 49%
|Weather endurance||it is good performance between -40℃ to 120℃. The yellow degree is 2 and light transmittance loss is just 6% after 4000hours accelarated aging test|
|High Light Transmission||up to 92%. The transmission loss is merely 6% in ten years, the transmission loss of PVC is 15% to 20% ,and 12% to20% of glass fiber|
|Anti-uv||compared with glass, the uv coating pc sheet will not turn yellow /hazy/degrade under the sun exposure.|
|1)Thickness of twin-wall polycarbonate sheet: 4,6,8,10,12mm|
|2)Thickness of triple-wall polycarbonate sheet: 8,10,12,14,16mm|
|3) Thickness of four-wall polycarbonate sheet: 8,10,12,14,16,18,20mm|
|4)Thickness of honeycomb polycarbonate sheet : 6,8,10,12,14,16mm.|
|5)Thickness of X-structure polycarbonate sheet : 12,14,16,18,20,22,25,30,32mm|
|6) Thickness of Solid polycarbonate sheet:1.5-15mm|
|7) Thickness of corrugated polycarbonate sheet:1,1.2,1.5,2,2.5,2.8mm|
|8) Thickness of embossed polycarbonate sheet:1.5-15mm|
|9) Thickness of solid polycarbonate roll:1.5,2,3,4mm, length:30m|
|10) Thickness of embossed polycarbonate roll:1.5,2,3,4,5mm, length:30m|
|11)Thickness of diffuse polycarbonate sheet: 1.5,2,3mm|
|★Length: No limit(Recommend 5800, 6000, 11800,1220,12000mm to 20'container &40'container)|
|★Color: clear/transparent, blue, green, opal, white, brown etc.|
Technical data of polycarbonate sheet
1) Impact strength: 850J/M
2) Light transmission: 25%-92%,depend on color and thickness
3) Specific gravity: 1.2g/cm3
4) Weather fastness: -40℃ to 120℃
5) Coefficient of thermal expansion: 0.065mm/m℃
6) Heat conductivity: 2.3-3.9w/m2℃
7) Tensile strength: ≥60n/mm2
8) Flexural strength: 100n/mm2
9) Tensile stress at break: ≥65mpa
10) Elongation at break: ＞100%
11) Specific heat: 1.17kj/kg.k
12) Soundproof index: 23-34dB
13) Modulus of elasticity: 2400mpa
14) Heat deflection temperature: 140℃
Clean Polycarbonate Sheet
a. Cleanse sheets with warm water below 60℃;
b. Use neutral detergent, soft cloth or sponge dipping in neutral detergent to scrub sheets. Do not use coarse cloth, brush, mop and other hard, sharp tools to wash with;
c. When there is grease, wet paint or tape mark on sheet surface, use soft cloth dipping in alcohol to scrub it;
d. Use clear water to flush fouling away completely;
e. Finally use dry cloth to wipe sheet surface dry and bright without visible water.
Note: Alkaline detergent is not applicable because it corrodes sheet surface; forbidden materials includes esters, ketones, halocarbons and others that dissolve or swell polycarbonate.
1. What kind of PC sheet can you product?
pc hollow sheet,pc solid sheet, embossed polycarbonate sheet,
corrugated pc sheet,frosted pc sheet ,and etc.
2. How long is the warranty of pc sheet?
10 years warranty for 100% virgin material.
3. What is the payment term?
T/T, Western Union,L/C, Cash.
Contact Person: admin